TapcoMetal Specifications

HomeProductsTapcoMetal • TapcoMetal Specifications

SHINGLE Specifications

 

 

Size: Full Length: 52″ (1320mm), Cover Length: 50″ (1270mm), Full Width: 10.5″ (267mm), Cover Width: 9.75″ (248mm), 3.33 pcs/m².
Accessories: STONE-COATED: Shingle Cap for Ridge & Hip. / Rake Channel x 79” (2007mm). / ZBar x 79” (2007mm). / Valley Cover x 79” (2007mm). / Tie-In Metal x 79” (2007mm). / SMART-jack pipe flashing. / SMART-Sleeve pipe covers. / SMART-vent ventilator panels. PAINTED: Starter Strip Metal x 120” (3048mm). / Short Course Cleat x 120” (3048mm). / Dbl ‘V’ Valley 120” (3048mm). / Drip Edge 120” (3048mm). / Side-Wall Underpan metal 120” (3048mm).
Protective Coating: *Galvalume® (*Reg. Trademark of BIEC Intl. Inc.)
Substrate: Steel — ASTM A-792
Mechanical Properties: Grade 33
Base Metal Thickness: .015″ (0.381mm)
Coating Weight: AZ-50 *Galvalume®
Primer: *Galvalume® Plus or pigmented Color Coating
Minimum Pitch: 12°
Weight: 1.63kg per panel or 5.27kg per m²
Pallet Size: 44″ W x 55″ L x 27″ H (1118mm W x 1397mm L x 686mm H) = Contains 480 Panels & Weighs 952.55kg approximately covering 148.6m²
CONCEALED Fasteners: BATTEN-LESS: Panels are installed from the bottom of the roof up to the ridge. Standard install four (4) fasteners per panel through the back horizontal fastening flange on each shingle panel.
HVHZ: High Velocity Hurricane Zone areas require special fasteners and in a specific pattern. Refer to Tapco’s HVHZ install details for more information.

 

ROMAN Specifications

 

 

Size: Full Length: 50.5″ (1283mm), Cover Length: 48″ (1219mm), Full Width: 16.5″ (419mm), Cover Width: 14.5″ (368mm), 2.26 pcs/m².
Accessories: STONE-COATED: Barrel cap for Ridge, Hip & Rake. / Fascia metal in 3½” (89mm) or 5” (127mm) face widths x 79” (2007mm). / Riser metal x 79” (2007mm). / Z-Bar x 79” (2007mm). / Valley Cover x 79” (2007mm). / Tie-In Metal x 79” (2007mm). / SMART-jack pipe flashing. / SMART-Sleeve pipe covers. / SMART-vent ventilator panels. PAINTED: Dbl ‘V’ Valley, Drip Edge, Side-Wall Underpan metal 120” (3048mm).
Protective Coating: *Galvalume® (*Reg. Trademark of BIEC Intl. Inc.)
Substrate: Steel — ASTM A-792
Mechanical Properties: Grade 33
Base Metal Thickness: .015″ (0.381mm)
Coating Weight: AZ-50 *Galvalume®
Primer: *Galvalume® Plus or pigmented Color Coating
Minimum Pitch: 12°
Weight: 2.5kg per panel or 5.37kg per m²
Pallet Size: 44″ W x 55″ L x 27″ H (1118mm W x 1397mm L x 686mm H) = Contains 400 Panels & Weighs 1020.6kg approximately covering 185.8m²
CONCEALED Fasteners: BATTENS: Panels are installed from top of roof down to fascia. Standard install four (4) fasteners per panel through the front down turned nose. BATTEN-LESS: Direct to deck standard installs have four (4) fasteners through the back horizontal flange and four (4) through the front down turned nose of each panel, for a total per panel of eight (8) fasteners.
HVHZ: High Velocity Hurricane Zone areas require special fasteners and in a specific pattern. Refer to Tapco’s HVHZ install details for more information.

 

SHAKE Specifications

 

 

Size: Full Length: 52.75″ (1340mm), Cover Length: 50″ (1270mm), Full Width: 16.5″ (419mm), Cover Width: 14.5″ (368mm), 2.15 pcs/m².
Accessories: STONE-COATED: Shake ‘V’ Cap for Ridge, Hip & Rake. / Fascia metal in 3½” (89mm) or 5” (127mm) face widths x 79” (2007mm). / Riser metal x 79” (2007mm). / Z-Bar x 79” (2007mm). / Valley Cover x 79” (2007mm). / Tie-In Metal x 79” (2007mm). / SMART-jack pipe flashing. / SMART-Sleeve pipe covers. / SMART-vent ventilator panels. PAINTED: Dbl ‘V’ Valley, Drip Edge, Side-Wall Underpan metal 120” (3048mm).
Protective Coating: *Galvalume® (*Reg. Trademark of BIEC Intl. Inc.)
Substrate: Steel — ASTM A-792
Mechanical Properties: Grade 33
Base Metal Thickness: .015″ (0.381mm)
Coating Weight: AZ-50 *Galvalume®
Primer: *Galvalume® Plus or pigmented Color Coating
Minimum Pitch: 12°
Weight: 2.5kg per panel or 5.37kg per m²
Pallet Size: 44″ W x 55″ L x 27″ H (1118mm W x 1397mm L x 686mm H) = Contains 400 Panels & Weighs 1020.6kg approximately covering 185.8m²
CONCEALED Fasteners: BATTENS: Panels are installed from top of roof down to fascia. Standard install four (4) fasteners per panel through the front down turned nose. BATTEN-LESS: Direct to deck standard installs have four (4) fasteners through the back horizontal flange and four (4) through the front down turned nose of each panel, for a total per panel of eight (8) fasteners.
HVHZ: High Velocity Hurricane Zone areas require special fasteners and in a specific pattern. Refer to Tapco’s HVHZ install details for more information.

 

TILE Specifications

 

 

Size: Full Length: 52.75″ (1340mm), Cover Length: 50″ (1270mm), Full Width: 16.5″ (419mm), Cover Width: 14.5″ (368mm). 2.15 pcs/m².
Accessories: STONE-COATED: Barrel cap for Ridge, Hip & Rake. / Fascia metal in 3½” (89mm) or 5” (127mm) face widths x 79” (2007mm). / Riser metal x 79” (2007mm). / Z-Bar x 79” (2007mm). / Valley Cover x 79” (2007mm). / Tie-In Metal x 79” (2007mm). / SMART-jack pipe flashing. / SMART-Sleeve pipe covers. / SMART-vent ventilator panels. PAINTED: Dbl ‘V’ Valley, Drip Edge, Side-Wall Underpan metal 120” (3048mm).
Protective Coating: *Galvalume® (*Reg. Trademark of BIEC Intl. Inc.)
Substrate: Steel — ASTM A-792
Mechanical Properties: Grade 33
Base Metal Thickness: .015″ (0.381mm)
Coating Weight: AZ-50 *Galvalume®
Primer: *Galvalume® Plus or pigmented Color Coating
Minimum Pitch: 12°
Weight: 2.5kg per panel or 5.37kg per m²
Pallet Size: 44″ W x 55″ L x 27″ H (1118mm W x 1397mm L x 686mm H) = Contains 400 Panels & Weighs 1020.6kg approximately covering 185.8m²
CONCEALED Fasteners: BATTENS: Panels are installed from top of roof down to fascia. Standard install four (4) fasteners per panel through the front down turned nose. BATTEN-LESS: Direct to deck standard installs have four (4) fasteners through the back horizontal flange and four (4) through the front down turned nose of each panel, for a total per panel of eight (8) fasteners.
HVHZ: High Velocity Hurricane Zone areas require special fasteners and in a specific pattern. Refer to Tapco’s HVHZ install details for more information.

 

COTTAGE Specifications

 

 

Size: Full Length: 51″ (1295mm), Cover Length: 47.5″ (1206mm), Full Width: 16.5″ (419mm), Cover Width: 14.5″ (368mm). 2.31 pcs/m².
Accessories: STONE-COATED: Shingle Cap for Ridge & Hip. / Fascia metal in 3½” (89mm) or 5” (127mm) face widths x 79” (2007mm). / Riser metal x 79” (2007mm). / Z-Bar x 79” (2007mm). / Valley Cover x 79” (2007mm). / Tie-In Metal x 79” (2007mm). / SMART-jack pipe flashing. / SMART-Sleeve pipe covers. / SMART-vent ventilator panels. PAINTED: Dbl ‘V’ Valley, Drip Edge, Side-Wall Underpan metal 120” (3048mm).
Protective Coating: *Galvalume® (*Reg. Trademark of BIEC Intl. Inc.)
Substrate: Steel — ASTM A-792
Mechanical Properties: Grade 33
Base Metal Thickness: .015″ (0.381mm)
Coating Weight: AZ-50 *Galvalume®
Primer: *Galvalume® Plus or pigmented Color Coating
Minimum Pitch: 12°
Weight: 2.5kg per panel or 5.37kg per m²
Pallet Size: 44″ W x 55″ L x 27″ H (1118mm W x 1397mm L x 686mm H) = Contains 400 Panels & Weighs 1020.6kg approximately covering 185.8m²
CONCEALED Fasteners: BATTENS: Panels are installed from top of roof down to fascia. Standard install four (4) fasteners per panel through the front down turned nose. BATTEN-LESS: Direct to deck standard installs have four (4) fasteners through the back horizontal flange and four (4) through the front down turned nose of each panel, for a total per panel of eight (8) fasteners.
HVHZ: High Velocity Hurricane Zone areas require special fasteners and in a specific pattern. Refer to Tapco’s HVHZ install details for more information.