by Fmeaddons

TapcoSlate Classic Ridge 90° End Cap

classic ridge end cap accessories

Suitable for TapcoSlate Classic and TapcoSlate Classic Ridge & Hip Caps, this accessory is a dry-fix ridge 90° end cap to neatly weather seal and finish off the roof line at the end of the ridge. Currently available in all six, stocked, Traditional TapcoSlate colours – 801 Stone Black, 804 Pewter Grey, 809 Red Rock, 709 Brick Red and 712 Chestnut Brown. Also stocked in three pitch variants, choose from 25 to 29 degrees, 30 to 34 degrees and 35 to 40 degrees to match the slope of your roof. This ridge accessory is manufactured in the same material as our TapcoSlate Classic product to beautifully match your roof slate. TapcoSlate Classic ridge 90° end caps have a degree of flexibility when fixing and have the same properties as our roofing slate:

  • Lightweight – as low as 12kg per square metre.
  • Easy to install with pre-marked nailing guides and spacers.
  • Easily cut with a fine-toothed saw or sharp utility blade.
  • Mechanically fixed.
  • Choice of all six of our stocked colours (for immediate availability).
  • Choice of three pitches (25 to 29°, 30 to 34° & 35 to 40°).
  • 40-year warranty.
  • Fully tested to BBA, ETA and CE standards, including fire rating, wind, driven snow & rain, and water absorption.
  • TapcoSlate Classic ridge 90° end caps are not made from recycled plastics but are manufactured from recyclable virgin limestone and polypropylene.

Description

TapcoSlate Classic Ridge 90° End Cap

Suitable for:

To be used in conjunction with our other TapcoSlate Classic products, including TapcoSlate Classic Ridge & Hip Caps.

Dimensions of 25 to 29 degree end cap:  Overall Length 445mm, Overall Width 290mm, Overall Height 70mm, Side Pitch 25°, End Pitch 90°. To Fit 25° to 29° roof pitches.

25-29 Degree Ridge End Cap

Dimensions of 30 to 34 degree end cap:  Overall Length 445mm, Overall Width 275mm, Overall Height 80mm, Side Pitch 30°, End Pitch 90°. To Fit 30° to 34° roof pitches.

30-34 Degree Ridge End Cap

Dimensions of 35 to 40 degree end cap:  Overall Length 445mm, Overall Width 265mm, Overall Height 90mm, Side Pitch 35°, End Pitch 90°. To Fit 35° to 40° roof pitches.

35-40 Degree Ridge End Cap

Please note, TapcoSlate Classic Ridge 90° End Caps cannot be inter-used with our Conservatory Roof Accessories line of products.

If in doubt please contact our sales team via email or telephone +44 (0)1482 880478. Depending on lighting conditions, our roofing accessories will reflect varying levels of color intensity and so actual colors may vary from those shown on the screen.


DOCUMENTATION & GUIDES

Download our Product Brochure
Download our Fixing Guide
Download our LABC Registered Details Fact Sheet
Download our LABC Registered Details Certificate
Download our BBA Certificate
Download our Warranty
Download our ETA Certificate
Download our Declaration of Performance
Download our TapcoSlate Fire Safety Report Part 1
Download our TapcoSlate Fire Safety Report Part 2
Download our LEED Specification
Download our Wind Performance
Download our Chemical Compatibility
Care and Maintenance of your TapcoSlate Roof